UCC3570DTR

UCC3570DTR Product Details

Product Parameters of UCC3570DTR

•  Product Name: UCC3570DTR

•  Manufacturer: Texas Instruments

•  Package: 14-SOIC (0.154", 3.90mm Width)

•  Category: AC/DC & Isolated DC/DC Switching Regulators

•  Description: Single Ended Active Clamp/Reset PWM Controller, 12.5/8.3V UVLO, 0°C to 70°C

•  Operating Temperature: 0°C to 70°C

•  Output Current: 1A

•  Switching Frequency: 50kHz ~ 1MHz

•  Input Voltage: 8.3V to 15V

•  Output Voltage: Adjustable

•  Duty Cycle: 69%

Product Introduction of UCC3570DTR

The UCC3570DTR is a single ended active clamp/reset PWM controller that can be used for isolated or non-isolated power converters. It features a UVLO (under voltage lockout) function that prevents the power switch from turning on until the input voltage reaches a sufficient level. It also has a programmable maximum duty cycle function that limits the output voltage and protects the power switch from over-stressing. The UCC3570DTR operates from a wide input voltage range of 8.3V to 15V and can provide an adjustable output voltage with a 69% duty cycle. The switching frequency is fixed at 50kHz ~ 1MHz, which allows the use of small and low-cost components. The UCC3570DTR is available in a 14-SOIC package and can operate from 0°C to 70°C.

Product Application Scope of UCC3570DTR

The UCC3570DTR can be used for various applications that require high efficiency, high isolation, and low output ripple, such as:

•  Telecom and datacom power supplies

•  Industrial and medical power supplies

•  Auxiliary power supplies for appliances and consumer electronics

•  Battery chargers and adapters

•  LED drivers and lighting systems

Common Questions and Answers of UCC3570DTR

•  Q: What is the difference between UCC3570DTR and UCC3570DT?

•  A: The UCC3570DTR is a tape and reel version of the UCC3570DT, which has the same functionality and performance. The UCC3570DTR is suitable for automated assembly processes.

•  Q: What is the purpose of the UVLO function of the UCC3570DTR?

•  A: The UVLO function of the UCC3570DTR is a feature that prevents the power switch from turning on until the input voltage reaches a sufficient level. This ensures that the power switch is not damaged by a low input voltage condition. The UVLO function has two thresholds: a turn-on threshold of 12.5V and a turn-off threshold of 8.3V. When the input voltage is below the turn-off threshold, the power switch is turned off and the output voltage is zero. When the input voltage rises above the turn-on threshold, the power switch is turned on and the output voltage is regulated.